Idea

Progress

Quality

+7 (3412)

956346

info@ininco.ru

Opening hours Mon-Fri
from 8:30 to 17:30
(MSK + 1)

8 (3412) 956 346

info@ininco.ru

Opening hours Mon-Fri
from 8:30 to 17:30 (MSK + 1)

| Production

Design and production of pipeline fittings
for the wellhead hookup and accessories for tubing strings

Home » Manifolds » Blowout prevention manifolds
Blowout prevention manifolds

The blowout prevention manifold serves to seal the wellhead and provide circulation of solutions in oil and gas wells and is designed to direct drilling agent from the well into the buffer tank or free discharge to reduce pressure in the well or reverse direction to prevent emissions and open fountains.

The blowout prevention manifold consists of choke and kill lines that are connected to the stem section of the blowout prevention equipment.

The choke manifold is designed to control the backpressure and transition from one throttling level to the other without interruption during the killing process. The kill manifold is connected to the drilling pumps and serves to inject the weighted solution through the tubular annulus (jamming), and, if necessary, can be used to drain the carbonated drilling agent into the degasser chamber.

The design of air defense manifolds is defined according to a typical scheme that determines the number of required manifold blocks.

We produce blowout prevention manifolds in accordance with standard blowout prevention schemes as per GOST Standards 13862 or according to customer’s schemes.

Манифольды ПВО Kill manifold

The kill manifold is connected to the drilling pumps and serves to inject the weighted solution through the tubular annulus (jamming), and, if necessary, can be used to drain the carbonated drilling agent into the degasser chamber…

Choke manifold Choke manifold

The choke manifold is designed to control the backpressure and transition from one throttling level to the other without interruption during the killing process..

Contact us here.

Our products

We are trusted